The Advantage LX ships with the following default settings:
Parameter | Default Setting |
|
|
Programming Language | CPL - Cognitive Programming Language |
|
|
Speed | 3 ips (76 mm/sec) |
Label Width | 2” Models: 220 (2.2” or 56 mm) |
| 4” Models: 409 (4.09” or 104 mm) |
|
|
Label Length | Measure label (automatically measures and |
| sets label length at power up) |
|
|
Indexing Type | Gap |
|
|
Reference Point | 0,0 (upper left corner) |
Auto Top of Form | On |
|
|
Enable Label Present | Off |
|
|
Advance Label | 75 (0.75” or 19 mm) |
Retract Label | 75 (0.75” or 19 mm) |
|
|
Delay Time (Retract Label) | 0 seconds |
|
|
Serial Port Settings | 9600 bps, 8 bit data, 1 stop bit, no parity |
(serial port printers only) | (DTE configuration - use |
|
|
Settings below only apply to printers with Ethernet | |
|
|
Printer IP Address | 10.0.0.12 |
Net Mask | 255.255.255.255 |
|
|
Gateway | 0.0.0.0 |
|
|
DHCP | On |
LPD | On |
|
|
RTEL | On |
|
|
RTEL Port Number | 9100 |
25
