Sun Microsystems T6320 service manual Clearing Faults With the Web Interface

2.6.4.1Clearing Faults With the Web Interface

This procedure describes how to enable components after a POST fault has been generated. The POST fault log is not actually cleared.

1.Select the tabs: System Information and Components tabs (FIGURE 2-19).

2.Select the radio button for the component that you must clear.

3.In the Actions menu, select: Enable Component.

FIGURE 2-19Enabling Components With the ILOM Web Interface

Note – The Clear Faults command in the Action menu will only clear the PSH- generated faults, and will not enable a component.

Chapter 2 Sun Blade T6320 Server Module Diagnostics 2-39