Sun Microsystems T6320 service manual Collecting Information From Solaris OS Files and Commands

1.After replacing a faulty FRU, at the ILOM prompt, type the ILOM -> show faults command to identify PSH detected faults.

PSH detected faults are distinguished from other faults by the text:

Host detected fault. For example:

->show /SP/faultmgmt

■If no fault is reported, you do not need to do anything else.

■If the fault is reported, continue with Step 2.

2.Type the clear_fault command with the UUID provided in the showfaults output:

->set /SYS/component clear_fault_action=true

Clearing fault from component...

Fault cleared.

2.8Collecting Information From Solaris OS Files and Commands

With the Solaris OS running on the Sun Blade T6320 server module, you have all the Solaris OS files and commands available for collecting information and for troubleshooting.

In the event that POST, ILOM, or the Solaris PSH features did not indicate the source of a fault, check the message buffer and log files for fault notifications. Hard drive faults are usually captured by the Solaris message files.

Type the syslogd command to view the most recent system message.

Use the /var/adm/messages file to view the system messages log file.

2.8.1Checking the Message Buffer

1. Log in as superuser.

2-46Sun Blade T6320 Server Module Service Manual • June 2009