Sun Microsystems T6320 service manual Viewing Fault Status Using the ILOM Web Interface

Use the web interface or type the show /SP/faultmgmt command for the following reasons:

■To see if any faults have been passed to, or detected by the ILOM firmware.

■To obtain the fault message ID (SUNW-MSG-ID) for PSH detected faults.

■To verify that the replacement of a FRU has cleared the fault and not generated any additional faults.

2.5.3.1Viewing Fault Status Using the ILOM Web Interface

In the ILOM web interface, you can view the system components currently in a fault state using the Fault Management page.

FIGURE 2-10Fault Management Page Example

The Fault Management page lists faulted components by ID, FRU, and TimeStamp. You can access additional information about the faulted component by clicking the faulted component ID. For example, if you clicked the faulted component ID, 0 SYS/MB/, the following dialog window appears displaying additional details about the faulted component.

2-22Sun Blade T6320 Server Module Service Manual • June 2009