Sun Microsystems T6320 service manual during normal system operation

	Caution – Insert the connector straight into the server module. The cable dongle is
	for temporary connections only. The cable dongle has not been evaluated for
	electromagnetic compatibility (EMC). The cable dongle or server module connectors
	could be damaged by closing rack doors or other impacts. Remove the cable dongle
	during normal system operation.
	Note – If you are using the older 4-cable dongle (UCP-4), do not use the RJ-45
	connector with the Sun Blade T6320 server module. Use the DB-9 connector for serial
	connections.
	TABLE 1-1Sun Blade T6320 Server Module Features
Feature	Description
Processor	One UltraSPARC® T2 multicore processor with 4MB L2 cache. Can execute up to 64
	threads.
Memory	16 slots for fully buffered DIMMs (FB-DIMM), 667 MHz:
	• 1 Gbyte (16 Gbyte maximum)
	• 2 Gbyte (32 Gbyte maximum)
	• 4 Gbyte (64 Gbyte maximum)

Internal hard drives Up to four hot-pluggable 2.5-inch hard drives.

•SFF SAS 73 Gbyte, 15k rpm, and 10k rpm

•SFF SAS 146 Gbyte, 10k rpm

(Filler panels are inserted anywhere hard drives are not installed.)

RAID Expansion Modules

RAID expansion modules (hard drive management) with RAID 0, 1 controller.

Eight links, x2 SAS (3 Gb/s) or SATA (1.5 Gb/s), supporting four internal hard drives and four x2 links to midplane. See Section 1.2, “Support for RAID Storage Configurations” on page 1-10.

Chapter 1 Sun Blade T6320 Server Module Product Description 1-5