Sun Microsystems T6320 service manual Replacing Cold-Swappable Components, Safety Information

C H A P T E R 4

Replacing Cold-Swappable

Components

This chapter describes how to remove and replace field-replaceable units (FRUs) that must be cold-swapped.

The following topics are covered:

■Section 4.1, “Safety Information” on page 4-1

■Section 4.2, “Common Procedures for Parts Replacement” on page 4-3

■Section 4.3, “Removing and Replacing DIMMs” on page 4-10

■Section 4.4, “Removing and Replacing the Service Processor” on page 4-15

■Section 4.5, “Removing and Replacing the Battery on the Service Processor” on page 4-18

■Section 4.6, “Replacing or Installing the Sun Blade RAID 5 Expansion Module” on page 4-20

■Section 4.7, “Removing and Replacing the Sun Blade G2 RAID 0/1 Expansion Module” on page 4-25

■Section 4.8, “Finishing Component Replacement” on page 4-28

4.1Safety Information

This section describes important safety information you need to know prior to removing or installing parts in the Sun Blade T6320 server module.

For your protection, observe the following safety precautions when setting up your equipment:

4-1