Sun Microsystems T6320 Replacing or Installing the Sun Blade RAID 5 Expansion Module

6.Before you poweron the host system, type the ILOM set /SP/clock datetime command to set the day and time.

For details about this command, refer to the Sun Integrated Lights out Manager 2.0 User’s Guide, 820-1188.

->set /SP/clock datetime=10

Set ‘datetime’ to ‘102421532007.30’

-> show /SP/clock

Targets Properties:

datetime = Wed Oct 24, 21:53:38 2007 usentpserver = disabled

...

4.6Replacing or Installing the Sun Blade RAID 5 Expansion Module

Note – Depending on how you ordered your server, the Sun Blade RAID 5 Expansion Module ships preinstalled in your server or as an option shipped separately. If your Sun Blade RAID 5 Expansion Module was shipped separately, see Section 4.6.1, “Installing the RAID 5 Expansion Module” on page 4-21.

Note – Avoid excess strain on the REM edges. Lift as close to the connector as possible.

Removing the RAID 5 Expansion Module

If you have a previously installed REM, save the configuration before removing it. Refer to the Sun Blade 6000 Disk Module Service Manual, 820-1703 and the Sun Blade 6000 Disk Module Administration Guide 820-4922

http://docs.sun.com/app/docs/prod/blade.6000disk~blade6000dskmod

Also refer to the Sun Adaptec RAID User’s Guide, 820-4708 for instructions on using the Java GUI to save the configuration of the existing REM.

4-20Sun Blade T6320 Server Module Service Manual • June 2009