Sun Microsystems T6320 service manual Replacing the Battery on the Service Processor

FIGURE 4-11Removing the Battery From the Service Processor

4.5.1Replacing the Battery on the Service Processor

1.Remove the replacement battery from the package.

2.Press the new battery into the service processor (FIGURE 4-11) with the positive side (+) facing upward (away from the card).

3.Place the edge of the service processor in between the tabs on the plastic bracket and carefully align the connectors.

4.Press between the handle edges until the service processor is seated in the connector.

5.Perform the procedures described in Section 4.8, “Finishing Component Replacement” on page 4-28.

Chapter 4 Replacing Cold-Swappable Components 4-19