Manuals / Sun Microsystems / Computer Equipment / Server

Sun Microsystems T6320 service manual D.2 Video Formats, host% fbconfig -res \?

Models: T6320

1 150

Download 150 pages 45.06 Kb

Page 140

D.2 Video Formats

D.2 Video Formats

TABLE D-1lists the monitor video formats supported by the XVR-50 graphics accelerator.

●To get a list of available screen resolutions for your display device, type:

host% fbconfig -res \?

If you have selected a resolution where support for this resolution cannot be verified, fbconfig displays the following output:

SUNWpfb_config: Cannot verify that selected resolution is a supported video resolution for this monitor

TABLE D-1lists video formats supported by the HD15 port.

TABLE D-1XVR-50 Graphics Accelerator HD15 Video Formats

Display			Aspect Ratio
Resolution	Vertical Refresh Rate	Sync Standard	Format

1600 x 1200	60 Hz	VESA	4:3
1600 x 1000	66, 76 Hz	Sun	16:10
1440 x 900	60 Hz	VESA	16:10
1440 x 900	76 Hz	Sun	16:10
1280 x 1024	60, 75, 85 Hz	VESA	5:4
1280 x 1024	67, 76 Hz	Sun	5:4
1280 x 800	76 Hz	Sun	16:10
1152 x 900	66, 76 Hz	Sun	5:4
1152 x 864	75 Hz	VESA	4:3
1024 x 768	60, 70, 75, 85 Hz	VESA	4:3
800 x 600	56, 60, 72, 75 Hz	VESA	4:3
720 x 400	85 Hz	VESA	9:5
640 x 480	60, 72, 75 Hz	VESA	4:3

D-2Sun Blade T6320 Server Module Service Manual • June 2009

Image 140

$Sun Microsystems T6320 service manual D.2 Video Formats, host% fbconfig -res \?$

Contents

Sun BladeTM T6320 Server Module Service Manual Sun Microsystems, IncThis distribution may include materials developed by third parties Contents 2. Sun Blade T6320 Server Module DiagnosticsPreface 1. Sun Blade T6320 Server Module Product Descriptioniv Sun Blade T6320 Server Module Service Manual June Contents 3. Replacing Hot-Swappable and Hot-Pluggable Components4. Replacing Cold-Swappable Components vi Sun Blade T6320 Server Module Service Manual June A. Specifications D. XVR-50 Graphics AcceleratorIndex Index-1Checking Device Configuration D-5 HD15 Video Output Port D-6Using UNIX Commands PrefaceAccessing Sun Documentation Typographic ConventionsShell Prompts http//docs.sun.com/app/docs/prod/blade.t6320module PrefaceSun Welcomes Your Comments Third-Party Web SitesDocumentation, Support, and Training Section 1.2, “Support for RAID Storage Configurations” on page Section 1.4, “Additional Service Related Information” on pageSun Blade T6320 Server Module Product Description 1.1 Component Overview1-2 Sun Blade T6320 Server Module Service Manual June FIGURE 1-1 Sun Blade T6320 Server Module With ChassisRear View FIGURE 1-2 Front and Rear PanelsFront View Four connector dongle cable UCP-4 two connectorsThree connector dongle cable UCP-3 RJ-45 serial USB two connectors 1-4 Sun Blade T6320 Server Module Service Manual Juneduring normal system operation TABLE 1-1 Sun Blade T6320 Server Module Features Continued 1-6 Sun Blade T6320 Server Module Service Manual JuneTABLE 1-2 Interfaces With the chassis and FIGURE A-2http//docs.sun.com/app/docs/prod/blade.srvr FB-DIMMs RAID Expansion Module Service processorwith NVRAM EEPROM with ILOM and ALOM Battery Hard drives Section 4.4, “Removing and Replacing the Service Processor” on page1-8 Sun Blade T6320 Server Module Service Manual June Replacement InstructionsSection 4.3.1, “Removing the DIMMs” on page1.1.1 Multicore Processor Information BL = blade server module NEM1 NEM0Sun StorageTek RAID Manager Software Users Guide 1.2 Support for RAID Storage ConfigurationsUniform Command-Line Interface Users Guide 1.2.1 Sun Blade RAID 5 Expansion Module 1.3 Finding the Serial Number1.2.2 Sun Blade RAID 0/1 G2 Expansion Module 1-12 Sun Blade T6320 Server Module Service Manual June FIGURE 1-6 Serial Number and MAC Address LocationMAC address Serial numberALOM CMT example 1.4 Additional Service Related Information 1-14 Sun Blade T6320 Server Module Service Manual Junesc showplatform Slot Number 5 Domain StatusSun Blade T6320 Server Module Diagnostics Section 2.2, “Memory Configuration and Fault Handling” on pageSection 2.5, “Using the ILOM Web Interface For Diagnostics” on page Section 2.3, “Interpreting System LEDs” on page2.1 Sun Blade T6320 Server Module Diagnostics Overview Sun Integrated Lights out Manager 2.0 User’s GuideChapter 2 Sun Blade T6320 Server Module Diagnostics FIGURE 2-1 Diagnostic Flowchart SP/faultmgtconnected and the chassis has power Section 2.5.3, “Displaying System Faults” on pageSystem Faults” on Check the OK LED. The OK LED is located on the front of the Sun BladeFRU-name deemed faulty and disabled Section 4.2, “Common Procedures for Parts Replacement” on pageSection 2.7.2, “Clearing PSH Detected Faults” on page Section 2.7.3, “Clearing the PSH Fault From the ILOM Logs” on pageWhen Upgrading Memory 2.2 Memory Configuration and Fault Handling2.2.1 FB-DIMM Configuration Guidelines 2.2.1.1 DIMM Installation Rules When Replacing Faulty FB-DIMMsFIGURE 2-3 FB-DIMM Installation Rules Four DIMMs installedEight DIMMs installed Sixteen DIMMs installedFIGURE 2-4 DIMM Locate Button and DIMM LEDs FB-DIMM Configuration and InstallationYou can also use TABLE 2-2 to identify the DIMMs you want to remove TABLE 2-2 FB-DIMM Configuration and Installation Continued 2.2.1.2 Memory Fault Handling2.2.1.3 Troubleshooting Memory Faults 2.3 Interpreting System LEDs 2.3.1 Front Panel LEDs and ButtonsThe LEDs have assigned meanings, described in TABLE FIGURE 2-5 Front Panel and Hard Drive LEDsFront View TABLE 2-3 LED Behavior and Meaning2-14 Sun Blade T6320 Server Module Service Manual June TABLE 2-4 LED Behaviors With Assigned MeaningsTABLE 2-5 Front Panel Buttons Chapter 2 Sun Blade T6320 Server Module DiagnosticsTABLE 2-4 LED Behaviors With Assigned Meanings Continued http//docs.sun.com/app/docs/prod/blade.6000mod 2.4 Using ILOM for Diagnosis and Repair Verification2.3.2 Ethernet Port LEDs ILOM Service Required LED FRU LEDs FRUID PROMs Event Logs Alerts2.5 Using the ILOM Web Interface For Diagnostics fru at location is OK2.5.1 Changing POST Settings With the ILOM Web Interface ILOM CLI -show /SP/network1. Select the Remote Control tab and the Diagnostics tab FIGURE 1. Type the show command to see the current POST settings 2.5.2 Changing POST Settings With the ILOM CLI2.5.3 Displaying System Faults 2.5.3.1 Viewing Fault Status Using the ILOM Web Interface FIGURE 2-12 Component Management Page - Fault Status 2.5.3.2 Viewing Fault Status Using the ILOM CLIFIGURE 2-11 Faulted Component ID Window show /SP/faultmgmt 2.5.4 Displaying the Environmental Status with the ILOM CLI3. Double click on the sensor reading that you want to check FIGURE Chapter 2 Sun Blade T6320 Server Module Diagnostics2.5.6.1 Using the ILOM Web Interface to Display FRU Information 2.5.6 Displaying FRU Information1. Select the System Information and Components tabs 2. Click on the component to view the FRU information FIGUREFIGURE 2-15 Static FRU Information in the ILOM Web Interface 2.5.6.2 Using the CLI to Display FRU InformationChapter 2 Sun Blade T6320 Server Module Diagnostics At the - prompt, type the show command show /SYS/MBsc showfru SYS/SP container 2.6 Running POST 2.6.1 Controlling How POST RunsTABLE 2-6 Parameters Used For POST Configuration FIGURE 2-16 Flowchart of ILOM Variables for POST Configuration 2-32 Sun Blade T6320 Server Module Service Manual June2.6.2.1 Using the Web Interface to Change POST Parameters 2. Select the Diagnostics Tab3. Select the POST settings that you require 2.6.2 Changing POST Parameters5. Select the Remote Power Control Tab 6. Select a power control setting and Select Save FIGUREFIGURE 2-17 Setting POST Parameters With the ILOM Web Interface 2-34 Sun Blade T6320 Server Module Service Manual JuneFIGURE 2-18 Changing Power Settings with the ILOM Web Interface 2.6.2.2 Using the CLI to Change POST Parameters 1. Verify the current post parameters with the show command. Type2. Type the set command to change the POST parameters show /HOST/diag3. Power cycle the server module to run POST cs MSG = test-error-message2.6.3 Interpreting POST Messages 1. Interpret the POST messages2.6.4 Clearing POST Detected Faults See Section 2.9, “Managing Components With Automatic System RecoveryCommands” on page show /SP/faultmgmt2.6.4.1 Clearing Faults With the Web Interface 3. In the Actions menu, select Enable Component1. Select the tabs System Information and Components tabs FIGURE 2. Select the radio button for the component that you must clear2.6.4.2 Clearing Faults With the ILOM CLI POST detected faults3. Reboot the server module show /SP/faultmgmt2.7 Using the Solaris Predictive Self-Healing Feature 2.6.4.3 Clearing Faults Manually with ILOM2.6.4.4 Clearing Hard Drive Faults show /SP/faultmgmt2.7.1 Identifying Faults With the fmadm faulty and fmdump Commands 2.7.1.1 Using the fmadm faulty Command2.7.1.2 Using the fmdump Command # fmdumpb. Type the message ID in the SUNW-MSG-ID field, and press Lookup 2.7.2 Clearing PSH Detected Faultsc. Follow the suggested actions to repair the fault 3. Clear the fault from all persistent fault records 2.7.3 Clearing the PSH Fault From the ILOM Logs1. After replacing a faulty FRU, boot the system 2.8 Collecting Information From Solaris OS Files and Commands 2.8.1 Checking the Message Buffer1. Log in as superuser show /SP/faultmgmt2.9 Managing Components With Automatic System Recovery Commands 2. Type the syslogd command1. Log in as superuser 2. Type the following command 3. If you want to view all logged messages, type this commandTABLE 2-8 ASR Commands 2-48 Sun Blade T6320 Server Module Service Manual June2.9.1 Displaying System Components With the show /SYS Command 1. At the - prompt, type the show command2.10.1 Checking SunVTS Software Installation 2.10 Exercising the System With SunVTS2.10.2 Exercising the System Using SunVTS Software 2. Enable the remote display. On the display system, type2.10.3 Steps for Exercising the System With SunVTS Software SunVTS 6.4 Test Reference Manual for SPARC Platforms4. Start SunVTS software 2-52 Sun Blade T6320 Server Module Service Manual June# /opt/SUNWvts/bin/sunvts -display display-system0 FIGURE 2-20 SunVTS BI6. Optional Customize individual tests 7. Start testing5. Optional Select the test category you want to run 2.11 Resetting the Password to the Factory Default 2.11.1 To Reset the Root Password to the Factory Default4. Change the root password 1. Remove the server module from the modular system chassisChapter 2 Sun Blade T6320 Server Module Diagnostics Page Replacing Hot-Swappable and Hot- Pluggable Components 3.1 Hot-Pluggable Hard Drives3.2 Hot-Plugging a Hard Drive Section 3.1, “Hot-Pluggable Hard Drives” on page3.2.2 Removing a Hard Drive 2. Type the Solaris OS commands required to stop using the hard drive3.2.1 Rules for Hot-Plugging 4. Push the latch release button FIGURE 5. Grasp the latch and pull the drive out of the drive slotAmber LED Service Action Required Green LED2. Slide the drive into the bay until it is fully seated FIGURE 3.2.3 Replacing a Hard Drive or Installing a New Hard Drive1. If necessary, remove the hard drive filler panel 3. Close the latch to lock the drive in place 4. Perform administrative tasks to reconfigure the hard drive3.3 Adding PCI ExpressModules 3-6 Sun Blade T6320 Server Module Service Manual June 4.1 Safety Information Section 4.1, “Safety Information” on pageSection 4.2, “Common Procedures for Parts Replacement” on page Section 4.4, “Removing and Replacing the Service Processor” on page4.1.2.1 Using an Antistatic Wrist Strap 4.1.1 Safety Symbols4.1.2 Electrostatic Discharge Safety 4.2 Common Procedures for Parts Replacement 4.1.2.2 Using an Antistatic Mat4.2.1 Required Tools 4.2.2 Shutting Down the System4.2.3 Using the ILOM Web Interface to Shut Down the Server Module 4. Shut down the Solaris OS using the shutdown 1Mcommand1. Log in as superuser or equivalent 2. Notify affected usersChapter 4 Replacing Cold-Swappable Components 4.2.4 Using the ILOM CLI to Shut Down the Server ModuleFIGURE 4-1 Powering Off the Server Module with the ILOM Web Interface 2. At the ILOM - prompt, type the set /SYS/PS0 Four connector dongle cable UCP-4 two connectorsThree connector dongle cable UCP-3 RJ-45 serial USB two connectors DB-9 serial, male TTYA4. Open the ejector levers FIGURE 4-8 Sun Blade T6320 Server Module Service Manual JuneFIGURE 4-4 Stack Five Server Modules or Fewer 6. Set the server module on an antistatic mat7. Attach an antistatic wrist strap 9. Lift the cover off the chassis 4.3 Removing and Replacing DIMMs4.3.1 Removing the DIMMs 2. Locate the DIMMs that you want to replace FIGURE FIGURE 4-6 DIMM Locate Button and DIMM LEDsSixteen DIMMs installed FB-DIMM ConfigurationFB-DIMM Configuration 1. Place the replacement DIMMs on an antistatic mat 2. Ensure that the connector ejector tabs are in the open position4.3.2 Replacing the DIMMs 6. Place DIMMs on an antistatic mat4.3.2.1 Verifying DIMM Installation 4.4 Removing and Replacing the Service Processor4.4.1 Removing the Service Processor 4. Place the service processor card on an antistatic mat 4.4.2 Replacing the Service Processor The PROM is keyed to ensure proper orientation4.5 Removing and Replacing the Battery on the Service Processor 3. Place the service processor on an antistatic matFIGURE 4-11 Removing the Battery From the Service Processor 4.5.1 Replacing the Battery on the Service Processor1. Remove the replacement battery from the package http//docs.sun.com/app/docs/prod/blade.6000disk~blade6000dskmod 4.6 Replacing or Installing the Sun Blade RAID 5 Expansion ModuleRemoving the RAID 5 Expansion Module 4.6.1 Installing the RAID 5 Expansion Module 2. Lift the card free from the connector3. Lift the REM free from the gray plastic standoff 1. Place the card under the tabs of the gray plastic standoff FIGUREVerifying the RAID 5 Expansion Module Installation 1. Power-up the computer and storage systemsa. Ensure that all hard disk drives are securely installed d. Power-on the computer systemIn the following example, the HBA is the first device that is listed 4.6.2 Configuring the RAID 5 Expansion Module 5. Return to the root node by using the unselect-dev command4.6.3 Creating a Bootable Array With the RAID 5 Expansion Module Uniform Command-Line Interface User’s Guide4.7 Removing and Replacing the Sun Blade G2 RAID 0/1 Expansion Module 4.6.4 Additional Information4.7.1 Replacing the RAID 0/1 Expansion Module 4-26 Sun Blade T6320 Server Module Service Manual June1. Place the card under the tabs of the gray plastic standoff FIGURE FIGURE 4-14 Removing the RAID Expansion ModuleChapter 4 Replacing Cold-Swappable Components 4.7.2 Verifying the RAID 0/1 Expansion Module InstallationFIGURE 4-15 Replacing the RAID 0/1 Expansion Module 4.8 Finishing Component Replacement 4.8.2 Reinstalling the Server Module in the Chassis4.8.1 Replacing the Cover 1. Place the cover on the chassisThe server module powers on with 3.3v standby power The ILOM software bootsFIGURE 4-17 Inserting the Server Module in the Chassis Chapter 4 Replacing Cold-Swappable Components4-30 Sun Blade T6320 Server Module Service Manual June Specifications A.1 Physical SpecificationsSection A.1, “Physical Specifications” on page A-1 Section A.2, “Motherboard Block Diagram” on page A-3A.1.1 System Environmental Specifications Operating Temperature and AltitudeNon-Operating Temperature and Altitude A-2 Sun Blade T6320 Server Module Service Manual JuneA.2 Motherboard Block Diagram Appendix A Specifications A-3A-4 Sun Blade T6320 Server Module Service Manual June Creating a Bootable Array With the Sun Blade RAID 5 Expansion Module “About Creating a Bootable Array on a SPARC System” on page“Creating a Bootable Array Task Map” on page “Modifying the Miniroot Directory On the Install Server” on page1. Install and connect the HBA and disk drives B.1 About Creating a Bootable Array on a SPARC SystemB.2 Creating a Bootable Array Task Map B.3 Modifying the Miniroot Directory On the Install Server 6. Modify two locations on the network install server7. Build a logical drive on which to install the Solaris 10 5/08 OS SUNWaac StorMan SUNWgccruntimeTo Modify the Miniroot Directory To Modify the Product Installation Directory # pkgadd -R installdirpath/Solaris10/Tools/Boot -d. SUNWaac# pkgadd -R installdirpath/Solaris10/Tools/Boot -d. SUNWgccruntime # pkgadd -R installdirpath/Solaris10/Tools/Boot -d. StorManB.5 Building a Logical Drive On Which to Install the Solaris OS To Create a Logical Drive Using a Network Install Server“To Create a Logical Drive Using a Network Install Server” on page “To Create a Logical Drive Without a Network Install Server” on pageLabeling the drive Partitioning the drive Preparing a file system To Create a Logical Drive Without a Network Install Server 4. Insert the path to your CDROM driveSC network configuration is IP Address Gateway address Netmask Ethernet Address 00144FE5AD6BTo Delete a Logical Drive on the REM To Label the Newly Created Logical Drive To delete a logical drive on the REM, use the DELETE card-number# init B.6 Next Steps# format B.6.1 Additional Information Uniform Command-Line Interface User’s Guidehttp//docs.sun.com/app/docs/coll/dsk-cntrl Sun StorageTek RAID Manager Software User’s GuideInstalling the Solaris OS and the RAID 5 Expansion Module Driver C.1 Preparing to Install the Solaris OSTo Prepare to Install the Solaris OS “Preparing to Install the Solaris OS” on pageC.2 Installing the RAID 5 Expansion Module Driver With the Solaris OS To Install the RAID 5 Expansion Module Driver With the Solaris OS2. Specify that you want to perform a Manual Reboot 3. Use the df command to verify the following7. Reboot the system 5. Apply the HBA driver package, SUNWaac6. Apply any patches that are specifically required for the system # rebootC.3 Next Steps C.3.1 Additional InformationUniform Command-Line Interface User’s Guide http//docs.sun.com/app/docs/prod/stortek.raid.hbaD.1 Features Section D.1, “Features” on page D-1Section D.6, “Default Color Depth” on page D-4 Section D.7, “Checking Device Configuration” on page D-5host% fbconfig -res \? D.2 Video FormatsD.4 Man Pages host% fbconfig -listD.3 Sun OpenGL for Solaris Software D.6 Default Color Depth To access the fbconfig man page, typeTo access the XVR-50 graphics accelerator man page, type 8. Set the desired screen resolution. For example, type2. Log out and then log back in for the change to take effect D.7 Checking Device Configurationhost% fbconfig -dev pfb0 -propt host% fbconfig -dev pfb0 -prconf D.8 HD15 Video Output PortIndex Page Page Page actions, 2-5 DIMMs UltraSPARC T1 processor and PSHvideo formats, HD15, D-2 video, Sun XVR-50, D-1 voltage and current sensor status, displayingIndex-6 Sun Blade T6320 Server Module Service Manual June