Sun Microsystems T6320 service manual At the ILOM - prompt, type the set /SYS/PS0

2.At the ILOM ->prompt, type the set /SYS/PS0

prepare_to_remove_action=true command and type y to confirm.

ILOM CLI, ILOM web interface, and ALOM-CMT command equivalents are shown in TABLE 4-1.

->set /SYS/ prepare_to_remove_action=true

Are you sure you want to stop /SYS (y/n)? y

Stopping /SYS

The blue blade ok2 remove LED is illuminated.

The top white LED is the Locator LED. You can also set the white locator LED to blink:

->set /SYS/LOCATE value=fast_blink

Once you have located the server module, you can press the Locator LED to turn it off.

3. If a cable is connected to the front of the server module, disconnect it.

4-6Sun Blade T6320 Server Module Service Manual • June 2009