Tripp Lite SMART1500RM2U warranty Specifications, System Overview, Output, Input

SMART 1500RM2U line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network grade AC surge suppression

1500VA/1000 watt power handling ability and full time sine wave output offers guaranteed compatibility with properly sized networking, telecom and other sensitive electronic devices

Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post mountable with optional 2POSTRMKITWM accessory, upright tower installation supported with optional 2-9USTAND accessory

Large internal batteries offer runtimes of 19 minutes at half load (750VA/500 watts) and 7 minutes at full load (1500VA/1000 watts)

Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V

Includes 8 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank)

PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification, event logging and running user-defined script commands

Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software.

Communications ports support messaging of UPS and line power status, including on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity

Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for a delayed or immediate reboot of connected devices

Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)

Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter

Emergency Power Off (EPO) interface with cable

Multi-function audible alarms and set of 5 front panel LEDs

Network-grade AC surge suppression

Attractive all-black color scheme

UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary Two year warranty with $250,000 connected equipment insurance (USA & Canada only)

Specifications

SYSTEM OVERVIEW

Voltage compatibility	120V AC
Frequency	60 Hz
compatibility
OUTPUT
Output VA	1500
Output watts	1000
Output nominal	120V AC
voltage
Output voltage	LINE MODE: Sine wave line voltage 120V (-21% +8%), BATTERY MODE: Sine wave output within 5% of 120VAC
regulation
Output frequency	LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz
regulation
Outlet quantity / type	8 NEMA 5-15R
Customized load	"Includes 2 load banks, each with 2 outlets that support load shedding and remote reboot on demand of locked network
management	devices. Controllable via PowerAlert software to switch off optional loads, like monitors, to increase available runtime for
receptacles	servers and other critical devices. "
Overload protection	15A input breaker
INPUT

Maximum input amps

Input connection type

10.4A / 1110 watts

NEMA 5-15P

Input cord length

10 ft., 14 gauge