Toshiba CS6940CL ［Electronic shutter specification］, Internal sync signal specification

Rev 1.0

(13)Power supply voltage

(14)Power consumption

［Electronic shutter specification］

(1)Shutter speed ・Readout mode

All pixel readout Partial scan High-speed draft readout

(2)Random trigger shutter ・Fixed mode

・Pulse width mode

(3)Multiple-shutter

DC12 V ± 10% (ripple 50 mV(p-p) or less) Approximately 2.8 W

AE/MANU switching (initial factory setting: MANU)

1/15 to 1/35000 s (1250 levels) 1/30 to 1/35000 s (625 levels) 1/48 to 1/35000 s (313 levels)

ON/OFF switching (initial factory setting: OFF)

The exposure time depends on the shutter speed setting. The exposure time depends on the pulse width. ON/OFF switching (initial factory setting: OFF) Exposure by TRIG input, readout by MULTI input

* Enabled when random trigger shutter is ON.

[Internal sync signal specification]

(1)Driving frequency

(2)Scanning frequency ・Readout mode

All pixel readout

Partial scan

High-speed draft readout

［Input signal specification］

(1)TRIG

・Signal level (DC IN input) ・Polarity

・Pulse width

(2)MULTI ・Polarity

・Pulse width

36.000 MHz

Horizontal	:18.750 kHz
Vertical	:15.000 Hz
Horizontal	:18.750 kHz
Vertical	:30.000 Hz
Horizontal	:15.000 kHz
Vertical	:47.293 Hz

Camera link I/F and DC IN connector input TTL level

Positive/Negative polarity switching possible (initial factory setting: Negative) 53.3μs or more

Camera link I/F input Negative polarity 53.3μs to 10 ms

D4134176A

3