Rev 1.0
4. Optional parts
(1) | Power cable | Model name: |
(2) | Camera Link cable | Model name: |
(3) | Camera adapter | Model name: CA130C |
(4) | Camera mounting kit | Model name: CPT4000CL |
*NOTE: Application software is not supplied as a standard item.
Notes on optional parts and compliance with safety standard conditions:
We assure the compliance of this camera with the safety standard when it is used in combination with the optional parts listed above.
If you use the camera in combination with parts other than specified by our company, you are responsible for finally confirming the compliance with the safety standard by using the entire machine/equipment.
5. Specifications
[Electrical specification] |
|
| |
(1) | Imager | Interline CCD |
|
・Number of total pixels | 1688 (H) x 1248 (V) |
| |
・Number of effective pixels | 1628 (H) x 1236 (V) |
| |
・Pixel size | 4.4μm (H) x 4.4μm (V) |
| |
・Optical size | 1/1.8 type |
| |
・Color filter | RGB primary color | ||
(2) | Scan method | Progressive |
|
(3) | Aspect ratio | 4:3 |
|
(4) | Synchronization method | Internal synchronization |
|
(5) | Standard subject illuminance | 2000 lx, F11, 5000 K |
|
(6) | Minimum subject illuminance | 7 lx （F1.4, GAIN MAX, all pixel readout, video level 50 %） | |
(7) | Video output | Compliant with the camera link standard. | |
・Data | RGB 24bit |
| |
・Readout mode |
|
| |
| All pixel readout | Approximately 15 fps / 1628(H) x 1236(V) | |
| Partial scan | Approximately 30 fps / 1628(H) x | 552(V) |
| Approximately 48 fps / 1628(H) x | 309(V) | |
(8) | Gain | 0 to +6 dB (256 levels) (initial factory setting: 0 dB) | |
(9) | Setup | 4 to 27 LSB (32 levels) (initial factory setting: 16 LSB (calculated value) ) | |
(10)White balance | OPWB/MANU switching (initial factory setting: MANU) | ||
(11)Gamma correction | ON/OFF switching (initial factory setting: ON) | ||
(12)Masking correction | ON/OFF switching (initial factory setting: OFF) | ||
D4134176A
2
