Sun Microsystems T6320 Changing POST Settings With the ILOM CLI, Displaying System Faults

2.5.2Changing POST Settings With the ILOM CLI

1. Type the show command to see the current POST settings:

->show /HOST/diag /HOST/diag

Targets Properties:

level = max mode = normal

trigger = power-on-reset error-reset verbosity = normal

Commands: cd set show

2.Change the POST settings with the set /HOST/diag command. For example:

-> set /HOST/diag level=min Set ’level’ to ’min’

-> set /HOST/diag mode=Normal Set ’mode’ to ’Normal’

-> set /HOST/diag verbosity=max Set ’verbosity’ to ’max’

-> set /HOST/diag trigger=power-on-resettrigger=error-reset Set ’trigger’ to ’power-on-reset’

Set ’trigger’ to ’error-reset’

2.5.3Displaying System Faults

ILOM displays the following faults with the web interface and CLI:

■Environmental faults – Temperature or voltage problems that might be caused by faulty FRUs (power supplies, fans, or blower), or by room temperature or blocked air flow.

■POST detected faults – Detected by the power-on self-test diagnostics.

■PSH detected faults – Detected by the Solaris Predictive Self-healing (PSH) technology

Chapter 2 Sun Blade T6320 Server Module Diagnostics 2-21