Sun Microsystems T6320 service manual Common Procedures for Parts Replacement, Required Tools

on the chassis. Do this after you disconnect the power cords from the server module. Following this practice equalizes the electrical potentials between you and the server module.

4.1.2.2Using an Antistatic Mat

Place ESD-sensitive components such as the motherboard, memory, and other PCB cards on an antistatic mat.

4.2Common Procedures for Parts Replacement

Before you can remove and replace internal components, you must perform the procedures in this section.

4.2.1Required Tools

You can service the Sun Blade T6320 server module with the following tools:

■Antistatic wrist strap

■Antistatic mat

4.2.2Shutting Down the System

Performing a graceful shutdown ensures that all of your data is saved and that the system is ready for restart. This section describes procedures for using the ILOM CLI and the ILOM web interface to shut down the system.

Chapter 4 Replacing Cold-Swappable Components 4-3