Sun Microsystems T6320 service manual Removing and Replacing DIMMs, Removing the DIMMs

FIGURE 4-5Antistatic Mat and Wrist Strap

8.While pressing the top cover release button, slide the cover toward the rear of the server module about an inch (2.5 mm).

9.Lift the cover off the chassis.

4.3Removing and Replacing DIMMs

This section describes how to remove and replace DIMMs.

4.3.1Removing the DIMMs

LEDs indicate if a DIMM requires replacement.

■If the system is still powered on and installed in the chassis, see Section 2.2, “Memory Configuration and Fault Handling” on page 2-7to determine if a DIMM requires replacement.

■If the server module is powered off, you can remove the server module from the chassis. Pressing the DIMM Locate button illuminates and LED next to the faulty DIMMs (FIGURE 4-6).

Caution – Ensure that you follow antistatic practices as described in Section 4.1.2, “Electrostatic Discharge Safety” on page 4-2.

4-10Sun Blade T6320 Server Module Service Manual • June 2009