VELATM TENT 12’ X 11’
Before you begin
Read all instructions before set up.
•Select a level campsite clear of rocks, branches, and other hard or sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
•Do not set up your tent under trees.
•For best results in windy conditions, position end of tent into the wind.
•Enlist the help of at least one other person to assist you when it is time to assemble the tent.
MODEL 2000001132
Parts and Components
Description | Part Number |
Main Poles, Long, Black (2) | 5010000509 |
Vestibule Pole, Thin, Black (1) | 5010000510 |
Rainfly | 5010000511 |
STITCH LINE
To Set Up Tent
1.Unfold tent and spread out on a clean, level surface with the door facing the desired direction. (Fig. 1)
2. Assemble two main tent poles by inter- locking longer, black
3. Insert main poles through sleeves in top of tent forming an “X” as shown. (Fig. 1)
4.Insert one end of each main pole into pins in front & back corners of tent. (Fig. 2A)
5.Go to opposite end of each pole and gradu- ally apply pressure to the pole forming an arch. Insert the pin into the pole end at the corners of tent. (Fig. 2 & 2A)
6.Attach frame clips along edges of tent to main poles. (Fig. 2B)
7.Stretch corners and sides of tent until floor is taut then hammer stakes through loops to secure. (Fig. 2C)
2A
Fig. 1
Long, Black,
Main Poles
Door |
Fig. 2 |
2B |
Door |
2C |
To Attach Rainfly
1.Assemble the
2.Unfold rainfly; then drape over tent with vestibule flaps positioned on both sides of the door. (Fig. 3)
3.Slide the vestibule pole through sleeve under front edge of rainfly. (Fig. 3)
4.Locate all hook and loop fasteners on
underside of rainfly; then wrap around | Sleeve on Front |
the main pole to secure. (Fig. 3A) | of Rainfly |
Main Poles |
|
|
|
| |||
|
|
|
| Door |
| ||
|
|
|
|
| Vestibule | ||
|
|
|
|
| Pole | ||
|
|
|
|
|
| ||
| 3A |
|
|
|
|
| |
|
|
| Vestibule Flaps | ||||
(continued on other side) | |||||||
|
|
| Fig. 3 | ||||
