Installing Tank
■Insert GENERATOR into large hole on front of stove and into mixing chamber above burner. Engage TANK CLIPS into slots on front of stove. (Fig. 10)
Fig. 10
■Swing WIND BAFFLES out and insert the WIRE CLIPS into slots in ends of stove. (Fig. 11)
Fig. 11 |
Lighting Main Burner
WARNING
•Perform leak test outdoors.
•Extinguish all open flames.
•NEVER leak test when smoking.
•Do not use the outdoor stove until connection has been leak tested and does not leak.
WARNING
•BURN HAZARD
•Never leave stove unattended when hot or in use.
•Keep out of reach of children.
NEVER FILL OR LIGHT STOVE INSIDE HOUSE, CAMPER, OR TENT.
■Close AUXILIARY VALVE. Turn LIGHTING LEVER to UP position.
(Fig. 12 & 13)
|
|
|
|
|
| Fig. 12 |
| Fig. 13 | |
|
|
|
|
|
■Hold lit match at MAIN BURNER before opening the FUEL VALVE. Open FUEL VALVE quickly, at least two full turns. (Fig. 14)
Fig. 14 |
CAUTION
A persistent high, yellow flame indi- cates flooding or a leak. Close fuel valve, let flames burn out and stove cool. Turn stove upside down to empty any fuel from burner and wipe dry. Review instructions and relight stove.
■Wait one full minute then turn LIGHTING LEVER down. (Fig. 15)
Fig. 15
■Open PUMP KNOB and pump additional pressure into tank. (Fig. 16 & Fig. 17)
|
|
|
|
|
| Fig. 16 |
|
| Fig. 17 |
|
|
|
|
|
Lista de piezas de reemplazo
| Encendido Estándar |
|
No. | 425 | Descripción |
1 | 220C1401 | Tapa del Combustible |
2 | 220A6201 | Juego de Reparación de la Bomba |
3 | Ensamblaje de la Bomba | |
4 | Generador | |
5 | 413D3461 | Ensamblaje del Anillo del |
|
| Quemador Auxiliar |
6 | Perilla de la Válvula | |
7 | 425A3451 | Ensamblaje del Anillo del Quemador Principal |
8 | 425A5281 | Ensamblaje del Colector |
9 | Rejilla | |
10 | 425B1651 | Tanque |
11 | Taza de la Bomba y Presilla | |
12 | 413B4971 | Presillas de los Deflectores de Viento |
13 | Ensamblaje de la Válvula de |
|
|