Coleman 5029 manual To Set Up, To Light, Eater Burner Valve Cup Holder Adapter Support Leg

To Set Up

NOTE: Use 16.4 oz disposable propane cylinders only. Do not connect to bulk propane systems. The LP-gas cylinder(s) used with catalytic heaters must be constructed and marked in accordance with the specifications for LP-gas cylinders of the U.S. Department of Transportation or Transport Canada, CAN/CSA B339.

■Features identified are Burner, Heater Valve, Support Leg, and Cup Holder Adapter. Propane tank is not included.

Heater	Burner
Valve
Cup
Holder
Adapter
	Support
	Leg
CAUTION

•SERVICE SAFETY

•Keep all connections and fittings clean. Inspect propane cylinder and heater propane connections for damage before attaching.

•During set up, check all connections and fittings for leaks using soapy water. Bubbles indicate a

4 leak. Never use a flame.

■Place CUP HOLDER ADAPTER in cart as shown.

■Turn HEATER VALVE to OFF.

■Attach CYLINDER to HEATER outdoors.

■Place HEATER ASSEMBLY in CUP HOLDER ADAPTER.

To Light

DANGER

•EXPLOSION - FIRE HAZARD

•Propane is heavier than air and can accumulate in low places. If you smell gas, leave the area immediately.

•Always attach or detach propane source outdoors;never while heater is lighted, near flame, pilot lights, other ignition sources or while heater is hot to touch.

•This heater is red hot during use and can ignite flammables too close to the burner. Keep flammables at least 24 inches from the sides and 24 inches from the top of the heater. Keep gasoline and other flammable liquids and vapors well away from heater.

WARNING

•BURN HAZARD

•Never leave heater unattended when hot or in use.

•Keep out of reach of children.