Coleman 5071 Series manual Setup, Leak Check, English-6

■Place the Inner Granite Surface in the storage position on the shelf (Fig 19).

Fig. 19

■Place three Outer Granite Surfaces in the frame. The joining ends of each surface MUST fully rest on a cross member of the frame (Fig 20).

Fig. 20

■The Firebowl Media consists of one bag of Rocks and one bag of Tumbled Glass.

■Carefully open the bag of Rocks and pour into the Firebowl and level. Next, open the bag of Tumbled Glass and pour on top of the Rocks and level. Make sure the metal cage over the electrode is not obstructed (Fig 21 and 22).

Fig. 21 Fig. 22

Setup

(disposable propane cylinders)

■Close the burner valve firmly (Fig. 23).

Fig. 23

■Remove the shut-off plug and cover it with the protective plastic cap (Fig. 24 and 25).

Fig. 24 Fig. 25

■Attach two Coleman 16.4 oz disposable propane bottles (Fig 26).

Fig. 26

Leak Check

WARNING

•Perform leak test outdoors.

•Extinguish all open flames.

•NEVER leak test when smoking.

•Do not use the gas fireplace until connection has been leak tested and does not leak.

■Note: Use Coleman 16.4 oz. disposable propane cylinders. The LP-gas supply cylinders to be used must be constructed and marked in accordance with the specifications for LP-gas cylinders of the U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN/CSA B339, Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods.

■Perform leak check on bottle to regulator connections with soapy water. Bubbles indicate a leak. Check that the connections are not cross-threaded and that they are tight. Perform another leak check. If there is still a leak, remove the cylinder(s) and contact Coleman for service or repairs (Fig 27).

Fig. 27

English-6