Coleman 9163-151 manual Before you begin, Parts and Components, To Set Up Tent, To Attach Rainfly

Fig. 11

DURANGOTM 15’ X 10’ MODEL 9163-151

STITCH LINE

Before you begin

Read all instructions before set up.

•Select a level campsite clear of rocks, branches, and other hard or sharp objects, to install your tent.

WARNING: Keep clear of overhead power lines.

•Do not set up your tent under trees.

•For best results in windy conditions, position end of tent into the wind.

•Enlist the help of at least one other person to assist you when it is time to assemble the tent.

Parts and Components

Description	Part Number
Main Poles, Black (2)	9163-1051
Side Pole, Gray (1)	9163-1061
Roof Ridge Pole, Black (1)	9163-1071
Rainfly Pole, Black (1)	9163-1081
Rainfly	9163-1091

To Set Up Tent

1.Unfold tent and spread out on a clean, level surface with the door facing the desired direction. Unzip door.

2. Stretch out corners and sides of tent. Secure with stakes driven in at an angle to better anchor the tent. (Fig. 1 & 2) Note: Staking the corners and sides will make it easier to raise and tear-down the tent.

Fig. 1 Fig. 2

3. Assemble roof ridge pole (3-section, black, shock-corded pole) and insert through sleeve in center of tent.

4. Place one end of roof ridge pole in brass grommet. Carefully apply pressure on pole to allow other end of pole to bow and be inserted into other brass grommet. (Fig. 3 & 4)

Fig. 3 Fig. 4

5. Assemble the 2 long, black shock-corded poles and insert through sleeves in top of tent forming an “X” as shown. (Fig. 5)

Fig. 5

6. Assemble gray, shock-corded, side pole and insert through sleeve in front of tent as shown. (Fig. 6)

Fig. 6

7.Insert one end of each black pole into pins located on the ring in center location at the back of the tent. (Fig. 7)

8.Insert other end of black poles into pins at front corners of tent; and end of gray pole into pins on sides of tent to form arches as

shown. (Fig. 8) Fig. 7

Gray

PoleGray

Pole

First		Second
Black Pole	Fig. 8	Black Pole

9.Attach frame clips along tent seams to gray side pole and both black poles. (Fig. 9 & 10)

Fig. 9 Fig. 10

To Attach Rainfly

1.Drape rainfly over tent. Make sure end with logo is centered over the door and the rainfly seams are centered over the

gray and black poles. (Fig. 11)

(continued on

other side)