Somerset Pass™ 17’x16’5”
When You Are Ready
To Set Up Your Tent
–Select a level campsite clear of rocks, branches and other hard or sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions, position the end of tent into the wind.
(2)Side Rainfly Poles Part No.
(1)Front Rainfly Pole (Gray) Part No.
Instructions apply to Part Number 9230-174C
POLE ASSEMBLY PARTS
(3)Main Tent Poles Part No.
(Black)
(2) Side Poles Part No. | Front Entrance Pole (Gray) |
| Part No. |
Rainfly Part No. |
| Pet Den Pole |
| Part No. | |
| ||
|
|
|
1 Layout & Positioning of Tent, Pole Assembly
–Layout and position tent with front door facing desired direction. (illus. 1)
–Unzip doors.
–Stake down tent corners only, using the stake loops. Keep the floor taut.
(illus. 2)(Intermediate loops will be staked later.)
–Assemble main tent poles by interlocking
–Insert the poles into pole sleeves.The poles should cross forming a triangle in the middle of tent. (illus. 1)
Assembled Main poles inserted through pole sleeves
illus. 1
illus. 2
Tent stake through ring on stake loop
2 Connect Frame to Tent
– Insert one pin into the end of main tent pole at tent corner. (illus. 3, illus. 4)
– Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pin into the pole end.
– Repeat for second and third main poles. (illus. 3, illus. 4) This will raise the center of the tent.
– Assemble side and front
Center poles
Side Pole in position see step 3
illus. 4
Tent center frame
illus. 3
Insert pin into pole end
