Coleman 9790 manual English-11, To Light Coleman Fuel Bottle

9 To Light (Coleman® Fuel Bottle)

NEVER FILL OR LIGHT STOVE INSIDE HOUSE, CAMPER, OR TENT.

■Make sure fuel bottle is lying level on its side with the FUEL VALVE up (Fig. 22).

■Turn flame adjuster back and forth several times to clean gas tip (Fig. 20).

■Turn flame adjuster to “Low” (Fig. 21).

■Turn on fuel valve until fuel is seen in bowl of stove (about 2-3 seconds for gas, 3-4 seconds for kerosene).

■Turn off fuel valve.

■Wait 5 seconds (10 seconds for kerosene).

■Use a match to light Priming Pad in bottom of stove (Fig. 22).

■Allow fuel to burn on Priming Pad until almost out. Just before flame goes out,

open fuel valve fully .

■CAUTION: If stove burns with a high yellow flame or if liquid fuel appears in the burner, immediately turn FUEL VALVE “OFF.” Allow stove to cool. Carefully review the troubleshooting section before relighting stove.

■If stove does not light, repeat the process.

■Adjust flame with flame adjuster (Fig. 20).

■Flame may be adjusted to desired heat with FLAME ADJUSTER. Periodically turn flame adjuster back and forth several times to clean gas tip. (Fig. 20)

■Pump as required to maintain flame height.

FIG. 20 FIG. 21

Matchlight

WARNING: Keep fuel bottle at least 8” from lit stove.

FIG. 22

English-11