7 To Pump (Coleman® Fuel Bottle)
■Make sure FUEL VALVE is fully “OFF” (Fig 12).
■Squeeze clips and remove black protective cap from bottle connection (Fig. 13).
■Remove protective plug from end of hose and place the plug into the cap for storage (Fig. 14 and 15).
■Connect hose to bottle connection, making sure both clips are engaged in groove (Fig. 16 and 17).
■Pump approximately 20 full strokes (Fig. 18). Adequate air pressure is important, do not over pump.
FIG. 12 |
| FIG. 13 | FIG. 14 | |
|
|
|
|
|
|
|
|
|
|
FIG. 15 | FIG. 16 | FIG. 17 |
|
|
|
|
|
|
FIG. 18