Rotisserie Assembly
Attach the Rotisserie to the Grill
NOTE: This Side Solution™ Rotisserie attachment is designed for use only when properly attached to Coleman® grill models 9993 and 9998. Attempted use or setup in a manner not described in this manual is prohibited and will void the warranty.
■Remove the components from the carton and discard all packing components.
■Wash the food contact surfaces with hot soapy water and dry completely. These items include the rotisserie spit rod and the meat forks. Wipe the inside and outside surfaces with a clean damp cloth and dry completely.
■For outdoor use only.
1.Align the tabs on the Side Rotisserie with the slots on the side of the grill (Fig. 2).
3.Engage the locks by firmly pushing the tabs into the slots (Fig. 4). Be sure to engage two locks on the Side Rotisserie.
Fig. 4
4.Check that the cylinder valve is closed by turning the cylinder knob clockwise to a full stop (Fig. 5).
Fig. 2
2.Use firm pressure to push the Side Rotisserie down and into place (Fig. 3). The joint between the Side Rotisserie and the Grill will be even.
Fig. 5
5. Turn off the control knob (Fig. 6).
Fig. 3
Fig. 6
