Rotisserie
Assembly
6.Push the fuel hose connection through the opening in the side grill panel (Fig. 7).
Fig. 7
7.Open the door to reveal the Quick Coupler in the upper corner. Retract the Collar on the Quick Coupler before attaching to the male fitting (Fig. 8). Release the collar to lock the connection.
Fig. 8
8.Check that the hose has no kinks or sharp bends and clears areas that will become hot during use. Never put strain on the hose where it joins a fitting.
9.Push the electrical plug down through the rotisserie frame (Fig. 9).
Fig. 9
10.Slide the motor downward over the bracket and push firmly into position (Fig. 10).
Fig. 10
11.Plug the rotisserie cord into the outlet in the back of the grill.
Setup
1.Slide the grease tray into the rails below the rotisserie (Fig. 11).
Fig. 11
Rotisserie Setup
NOTE: To use the rotisserie, the wire oven rack must be removed and set aside.
2.Assemble the meat forks and the collar onto the spit rod (Fig. 12). Adjust the location of the collar with the thumbscrew to support the spit rod.
Fig. 12
