Coleman XP-2H38WC instruction manual What’s Inside the Package, Features, Installation

What’s Inside the Package

∙LED XP-2H38WC solar security light w/ Camera

∙Mounting Screws

∙Mounting Template

∙Solar charging panel with 15’ Cable

∙Receiver

∙A/C Adapter (Receiver)

∙Audio/Video connecting cables

∙Owner/Installation Manual

Features

∙High efficiency, rechargeable Lithium battery.

∙Detects motion at over 30 ft.

∙Lithium-ion battery emits zero pollution, protecting the environment.

∙High brightness illumination.

∙Wireless broadcast of audio and video to a remote monitoring source.

Installation

∙The XP-2H38WC light fixture should be installed on a flat and stable surface: the higher the installation the larger the area of illumination.

∙Avoid installing the light near an air conditioner, heater, or high voltage system as quick changes in temperature may cause the motion detection system to produce false triggers and illuminate the light needlessly.

∙Avoid positioning the motion sensor head towards street traffic or anywhere other movements may trigger the light needlessly and drain the battery prematurely.

∙The solar panel should be installed facing the sky (typically on the roof) with maximum sun exposure. Try to avoid areas of shade keeping in mind that obstacles will cast shadows at different times during the day or seasons.

∙Use a soft damp cloth to periodically clean the solar panel from accumulated dust or snow. This will help preserve the life of the battery and maximize charging efficiency.

1)Use the enclosed mounting template to locate and mark mounting holes. Using a ¼” drill, drill two holes in the marked spots. Gently tap the mounting anchors into drilled holes. Secure screws into mounting anchors leaving aprox. 1/8” of screw exposed.

2)Place the light over the screws.