Coleman XP-2H38WC instruction manual Introduction, Important Safety Information

Please do not return this item to the store. If you have

any questions, please contact Apex Digital directly (866.427.3946 or visit www.apexdigitalinc.com)

Introduction

Thank you for purchasing the Coleman solar powered security light (XP-2H38WC) with built-in wireless camera and microphone. This solar security light will allow you to illuminate and monitor activities in real time from locations up to 100 ft. from the included receiver. Because the unit is solar powered there is no need for an AC power outlet: simply place the unit where security lighting is needed. You will need to locate an area within 15 ft. of the unit with unobstructed sunlight (usually on the roof) to place the included solar panel. Plug the panel into the solar security unit and that’s it. This product harvests clean energy from the sun that is converted into electricity.

When motion is detected, the unit will broadcast a video and audio signal to the included receiver. An audible beep at the receiver will let you know that motion has been detected. The receiver can be plugged into any monitoring device (TV, Computer, or Monitor) with the enclosed connecting cables and view and hear in real time what has activated your solar security light. The unit has a photocell that activates the LED lights for nighttime monitoring.

Important Safety Information

∙Do not expose the light to fire or intense heat.

∙Do not dispose of battery in fire.

∙Do not immerse in water.

∙Never look directly into the light or shine in another person’s eyes.

∙Do not dispose of the rechargeable battery in a regular waste system, waterway, stream or any other body of water.

∙Preserve the environment by disposing battery in accordance with local, state and federal regulations

∙Consult your local construction safety guidelines for installing the light fixture on a building.

∙Only use batteries from XEPA TECHNOLOGIES to ensure compatibility.

(Refer to the product’s original battery for correct size.)

∙The battery should be positioned so it has the correct polarity (+) and (-).