Safety Instructions
About the controls with temperature settings.
(Models with controls inside the refrigerator)
Operating Instructions
HOME
HELP
LOCK
Hold for 3 Seconds to activate Lock
|
|
|
|
|
|
| TURBO | |
ENERGY SAVER ON |
|
|
| COOL | ||||
|
| |||||||
|
|
|
|
|
|
| ||
FREEZER | REFRIGERATOR |
|
|
| ||||
0 F |
| 37 F |
|
|
|
| ENERGY | |
|
|
|
|
| SAVER |
| ||
|
| |||||||
|
|
|
|
|
| |||
PRECISE FILL |
| OPTIONS |
|
|
|
| ||
| DOOR | |||||||
|
|
|
|
|
|
| ALARM | |
|
|
|
|
|
|
|
|
|
(Models with controls on the door)
Installation | Instructions |
Tips
NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.
The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment.
Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.
Changing the Temperature
Consumer Support Troubleshooting
For
Models with External Dispensers:
To change the Refrigerator temperature:
Access By: Home > Refrigerator
Activate By: Using the arrows to select the desired temperature. You must press ENTER to set the new temperature.
To change the Freezer temperature:
Access By: Home > Freezer
Activate By: Using the arrows to select the desired temperature. You must press ENTER to set the new temperature.
Once the desired temperature has been set, the display will return to the HOME screen and show the set temperatures underneath the actual temperature display for several seconds. Several adjustments may be required. Each time you adjust the controls, allow 24 hours for the refrigerator to reach the temperature you have set.
For Controls Inside the Refrigerator:
Opening the door displays the actual temperature. To change the temperature, press either the WARMER or
4COLDER touch pads until the desired temperature is displayed.
Once the desired temperature has been set, the temperature display will return to the actual refrigerator and freezer temperatures after 5 seconds. Several adjustments may be required.
Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set.
To turn the cooling system off, tap the WARMER pad for either the refrigerator or the freezer until the display shows OFF. To turn the unit back on, press the COLDER pad for either the refrigerator or freezer. Then press the COLDER pad again and it will go to the preset points of 0°F for the freezer and 37°F for the refrigerator. Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.
Models with External Dispensers:
Access By: Home > Options > Information and Settings > Cooling System Off
To turn the cooling system back on, press the touch screen and press the ON button.
Activate By: Pressing ENTER.