Instructions
Replacing the light bulbs.
Turning the control to the 0 (off) position does not remove power to the light circuit.
Operating Instructions Safety
Refrigerator Lights
For models with LED lights:
An authorized technician will need to replace the LED light.
For models with incandescent lights:
CAUTION: Light bulbs may be hot.
Unplug the refrigerator.
To remove the light shield, grasp the shield at the back and pull out to release the tabs at the back.
Rotate the shield down and then forward to release the tabs at the front of
the shield.
After replacing with an appliance bulb of the same or lower wattage, replace the shield.
Plug the refrigerator back in.
NOTE: Appliance bulbs may be ordered from GE Parts and Accessories, 800.626.2002.
Installation | Instructions |
Consumer Support Troubleshooting Tips
Appearance may vary
Freezer Light
CAUTION: Light bulbs may be hot.
Unplug the refrigerator.
The bulb is located at the top of the freezer inside a light shield. To remove the shield, grasp the shield at the back and pull out to release the tabs at the back.
Rotate the shield down and then forward to release the tabs at the front of
the shield.
After replacing with an appliance bulb of the same or lower wattage, replace the shield.
Plug the refrigerator back in.
14
