Installation Instructions
INSTALLING THE REFRIGERATOR (cont.)
6REMOVE THE FRESH FOOD DOOR HANDLE
(For placement in the installation location or reversal of the handles – on some models)
Stainless steel (on some models):
AREMOVING THE DOOR HANDLE:
Loosen the set |
| |
screws with the |
| |
3/32″ Allen wrench |
| |
and remove the | Badge | |
handle. NOTE: For | ||
A | ||
Double Door models, | ||
| ||
follow the same |
| |
procedure on the |
| |
opposite door. | B |
Mounting
Fasteners
(appearance may vary)
Plastic handle (on some models):
AREMOVING THE DOOR HANDLE: Depress the tab on the underside of the handle and slide the handle up and off of the mounting fasteners.
REVERSING THE |
| |
DOOR HANDLE |
| |
(on some models): | B | |
• Remove the | ||
| ||
handle mounting | Badge | |
fasteners with a | ||
| ||
1/4″ Allen wrench | ||
and transfer the | A | |
handle mounting | ||
| ||
fasteners to the |
| |
right side. | Mounting | |
• Remove the | ||
Fasteners | ||
logo badge. |
|
• Remove and transfer the plug button to the left
side of the fresh food door. NOTE: Use a flat plastic edge to prevent damaging the door. Remove any adhesive on the door with a mild detergent. Remove the paper covering on the adhesive backing on the logo badge prior to carefully attaching the badge to the door.
7REMOVE THE TOP AND BOTTOM FREEZER DRAWER HANDLES
Stainless steel and plastic handles:
ALoosen the set screws located on the underside of the handle with the 1/8″ Allen wrench and remove the handle.
NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4″ Allen wrench.
A
A
20