Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

Use this appliance only for its intended purpose as described in this Owner’s Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Operating Instructions

This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used.

Do not allow children to climb, stand or hang on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

Do not touch the cold surfaces in the freezer compartment when hands are damp or wet. Skin may stick to these extremely cold surfaces.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.

In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. Do not place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

Unplug the refrigerator before cleaning and making repairs.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

Setting either or both controls to 0 (off) does not remove power to the light circuit.

Do not refreeze frozen foods which have thawed completely.

Consumer Support Troubleshooting Tips

DANGER! RISK OF CHILD ENTRAPMENT

PROPER DISPOSAL OF THE REFRIGERATOR

Child entrapment and suffocation are not problems of Refrigerants the past. Junked or abandoned refrigerators are still

dangerous…even if they will sit for “just a few days.”

All refrigeration products contain refrigerants,

which under federal law must be removed prior

If you are getting rid of your old refrigerator, please

to product disposal. If you are getting rid of an

follow the instructions below to help prevent

old refrigeration product, check with the company

accidents.

handling the disposal about what to do.

Before You Throw Away Your Old

 

Refrigerator or Freezer:

 

Take off the doors.

Leave the shelves in place so that children may not easily climb inside.

USE OF EXTENSION CORDS

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed (in the United States) or a CSA certified (in Canada), 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts.

2

Page 2
Image 2
GE 225D1804P001 Safety Instructions, Consumer Support Troubleshooting Tips, Before You Throw Away Your Old

225D1804P001 specifications

The GE 225D1804P001 is a cutting-edge electric motor that stands out in its class due to its innovative design and advanced technologies. This particular motor exemplifies General Electric's commitment to excellence, blending efficiency, reliability, and performance in one compact device.

One of the main features of the GE 225D1804P001 is its robust construction, designed to withstand demanding industrial environments. The motor is built with high-quality materials that enhance its durability, making it suitable for continuous operation under heavy loads. Its weather-resistant exterior allows it to perform seamlessly in adverse conditions, further extending its lifespan.

In terms of technology, this motor incorporates state-of-the-art variable frequency drive (VFD) compatibility, which enables precise speed control and energy efficiency. The VFD technology allows users to adjust the motor’s speed according to the specific needs of their applications, resulting in energy savings and reduced wear and tear on machinery.

The GE 225D1804P001 also features high starting torque, which is essential for applications requiring a strong initial force to overcome inertia. This characteristic makes it ideal for heavy machinery and equipment within manufacturing, automotive, and industrial sectors. Additionally, the motor's optimized rotor design contributes to improved performance, ensuring effective torque delivery and lower operational costs.

Another significant characteristic of this model is its low noise operation. Unlike many electric motors, the GE 225D1804P001 is engineered to minimize vibrations and sound levels, creating a more comfortable working environment. This feature is particularly beneficial for facilities that operate in close proximity to populated areas or sensitive environments.

Moreover, the ease of maintenance is a noteworthy aspect of this electric motor. It is designed with accessible components, allowing technicians to perform routine checks and repairs without extensive downtime. This user-friendly design not only enhances operational efficiency but also contributes to the overall cost-effectiveness of ownership.

In summary, the GE 225D1804P001 electric motor combines innovation, efficiency, and reliability, making it an exceptional choice for a wide range of industrial applications. With features like VFD compatibility, high starting torque, robust construction, and low noise operation, it continues to set new standards in the electric motor industry, satisfying the needs of modern manufacturing and industrial processes.