(sur les modèles de 21 pi)

!

 

Instructions d’installation

 

 

 

OUTILS DONT VOUS POUVEZ AVOIR BESOIN (SUITE)

 

 

Tourne-écrou de 1/4 po

Cisaille

Crayon

 

 

 

 

 

 

 

Perceuse à main ou

 

 

Niveau

électrique et mèche

Mètre

 

de 1/8 po

 

 

INSTALLATION DU SUPPORT DE SOL DU MÉCANISME ANTI- BASCULEMENT

AVERTISSEMENT

Dans certaines conditions, ce réfrigérateurs peut basculer vers l’avant.

Cela peut entraîner des blessures corporelles.

Installez le support anti-basculement emballé avec votre réfrigérateur.

1MESUREZ L’OUVERTURE DISPONIBLE DANS L’ARMOIRE ET COMPAREZ CETTE MESURE À LA LARGEUR DU RÉFRIGÉRATEUR

Mesurez W, la largeur de l’ouverture de l’armoire dans laquelle vous voulez mettre votre réfrigérateur.

Assurez-vous de tenir compte de tout surplomb du comptoir, de l’épaisseur de la plinthe et de tout espace libre désiré. La largeur W doit être supérieure à 91,4 cm (36 pouces). Vous devez placer le réfrigérateur approximativement au milieu de cette ouverture.

2POSITIONNEMENT DU SUPPORT DE SOL ANTI-BASCULEMENT

APlacez le gabarit de positionnement du support de sol anti-basculement (compris à l’intérieur de la trousse anti-basculement), sur le sol contre le mur arrière, à l’intérieur de W, et en ligne avec l’emplacement désiré du côté droit du réfrigérateur (voir Figure 1).

Figure 1 – Vue d’ensemble

de l’installation

Sol – ciment

2 trous dans mur

 

 

 

(2 trous)

 

Support de sol à

Sol – bois (2

 

installer

trous)

 

Trous à droite

 

18,4 cm

 

 

(714 po)

 

 

 

Arrière à droite de

Support

 

la paroi de

de base sur

 

l’armoire

le réfrigérateur

Côté droit du

Gabarit de

 

réfrigérateur

 

positionnement

 

 

BPlacez le support de sol anti-basculement dans le gabarit de positionnement avec ses trous au sol de droite alignés aux trous au sol indiqués sur le gabarit, à approximativement 18,4 cm (71/4 po) de l’extrémité du gabarit ou du côté droit du réfrigérateur.

C Tenez en position et utilisez le support de sol anti-

basculement comme gabarit pour marquer les trous

Mur arrière

W

RÉFRIGÉRATEUR

Épaisseur de la plinthe ou surplomb du comptoir (la mesure la plus grande) plus tout espace libre désiré

Côté droit du réfrigérateur

en vous basant sur votre configuration et la catégorie

de construction indiquée dans l’étape 3. Marquez

l’emplacement des trous avec un crayon, un clou ou

un poinçon.

NOTE :

• Vous devez obligatoirement utiliser au moins 2 vis

pour monter le support de sol (une de chaque côté du

support de sol anti-basculement). Les deux doivent

entrer dans le mur ou dans le sol. La figure 2 indique

toutes les configurations de montage acceptables

Devant

pour ces vis. Trouvez les trous de vis sur le support de

sol anti-basculement.

62

Page 62
Image 62
GE 225D1804P001 installation instructions Outils Dont Vous Pouvez Avoir Besoin Suite, Un poinçon, Sol anti-basculement

225D1804P001 specifications

The GE 225D1804P001 is a cutting-edge electric motor that stands out in its class due to its innovative design and advanced technologies. This particular motor exemplifies General Electric's commitment to excellence, blending efficiency, reliability, and performance in one compact device.

One of the main features of the GE 225D1804P001 is its robust construction, designed to withstand demanding industrial environments. The motor is built with high-quality materials that enhance its durability, making it suitable for continuous operation under heavy loads. Its weather-resistant exterior allows it to perform seamlessly in adverse conditions, further extending its lifespan.

In terms of technology, this motor incorporates state-of-the-art variable frequency drive (VFD) compatibility, which enables precise speed control and energy efficiency. The VFD technology allows users to adjust the motor’s speed according to the specific needs of their applications, resulting in energy savings and reduced wear and tear on machinery.

The GE 225D1804P001 also features high starting torque, which is essential for applications requiring a strong initial force to overcome inertia. This characteristic makes it ideal for heavy machinery and equipment within manufacturing, automotive, and industrial sectors. Additionally, the motor's optimized rotor design contributes to improved performance, ensuring effective torque delivery and lower operational costs.

Another significant characteristic of this model is its low noise operation. Unlike many electric motors, the GE 225D1804P001 is engineered to minimize vibrations and sound levels, creating a more comfortable working environment. This feature is particularly beneficial for facilities that operate in close proximity to populated areas or sensitive environments.

Moreover, the ease of maintenance is a noteworthy aspect of this electric motor. It is designed with accessible components, allowing technicians to perform routine checks and repairs without extensive downtime. This user-friendly design not only enhances operational efficiency but also contributes to the overall cost-effectiveness of ownership.

In summary, the GE 225D1804P001 electric motor combines innovation, efficiency, and reliability, making it an exceptional choice for a wide range of industrial applications. With features like VFD compatibility, high starting torque, robust construction, and low noise operation, it continues to set new standards in the electric motor industry, satisfying the needs of modern manufacturing and industrial processes.