6.Remove the display panel assembly.

7.Remove the screw located under the bottom of the unit (rear) which secures the Upper CPU cover to the chassis and remove three screws located on the top.

8.Lift the Upper CPU cover off the snaps on the chassis which will disconnect the power switch from the connector on the system board.

To replace the Upper CPU cover, reverse the previous procedures.

file:///C/SERVICE%20MANUALS/COMPAQ%20_%20che...ESARIO%201200%20SERIES%201230%201232/510.html (2 of 2)6/27/2004 2:20:47 AM