Removal and Replacement Procedures

4.Remove the TM2.5 × 5.0 screw 1 that secures the display video ground cable to the heat spreader (Figure 5-23).

5.Disconnect the display video cable 2 from the system board.

6.Remove the display video cable from the routing channels in the heat spreader and the top cover 3.

7.Remove the TM2.5 × 5.0 screw 4 that secures the display inverter ground cable to the heat spreader.

8.Disconnect the display inverter cable 5 from the system board.

Figure 5-23. Removing the Display Screws and Disconnecting the Display Cables

Maintenance and Service Guide

5–31