Removal and Replacement Procedures

3.Remove the three TM2.5 × 5.0 screws 1 that secure the charger board to the base enclosure (Figure 5-37).

4.Lift the front edge of the charger board shield 2 until it clears the base enclosure, then slide the shield forward to remove it.

5.Lift up on the back edge of the charger board 3 to disconnect it from the system board.

6.Remove the charger board 4 from the base enclosure.

Figure 5-37. Removing the Charger Board

Reverse the preceding procedures to install the charger board.

5.19 Speaker Assembly

Speaker Assembly

Spare Part Number Information

Speaker assembly

285538-001

 

 

1.Prepare the computer for disassembly (Section 5.3).

2.Remove the palm rest (Section 5.14).

5–48

Maintenance and Service Guide