Installation (Windows NT)
Keyboard: XT, AT, or Enhanced Keyboard
Keyboard Layout: US
Pointing Device: Mouse Port Mouse
No Changes: The above list matches my computer
When you have completed the Windows NT installation, go to Section 4.3.5.
__________________________ Note ____________________________
On the Intel platform, some monitors are unable to display the refresh rate used during a short period of the initial installation of Windows NT 4.0 when using the PowerStorm 300. This occurs after the first part of a fresh installation of Windows NT following the period when the files are copied to the hard drive, but before Windows NT displays the first full color display screen. If you have chosen to use NTFS as your file system you may need to press the Enter key during the period while the screen is black to begin the process of converting the file system from FAT to NTFS.
___________________________________________________________
4.3.5 Installing/Upgrading PowerStorm Software Display Drivers
If you have purchased the PowerStorm 300 AGP or 300/350 PCI graphics controller as an option, you must install the Compaq PowerStorm 300/350 display drivers. To install the 2D and 3D drivers (the Compaq optimized OpenGL support) from the Compaq PowerStorm software CD, follow these steps:
1.Boot your workstation and log into Windows NT if you have not already done so.
2.From the desktop, choose My Computer.
3.Choose Control Panel.
4.Choose Display.
5.Choose the Settings tab.
6.Choose the Display Type button to see the driver and adapter (board) information.
7.Choose Change.
8.Choose Have Disk.
9.In the Install from Disk dialog box, you are prompted to insert the manufacturer’s installation disk into the selected drive. Insert the Compaq PowerStorm Software CD into the
