Specifications” chapter for the tips characteristics and polarity.
Step 3:
Set the battery pack output voltage at the value required by your notebook as follows:
1.Move the Lock/Unlock switch to Unlock position;
2.press the pushbutton to select output voltage. The output voltage is displayed by a LED (5.5V, 16V and 19V are selectable);
3.Move the Lock/Unlock switch back to Lock position;
Step 4:
Press the pushbutton on the front panel of the battery pack and check LED indicators. If only one or no indicators are lighted, it means that the battery is not charged and first you have to fully charge it using your notebook charger. Follow the instructions on the “how to charge” section in order to charge Energy Box. During the charge the first LED will be red lit. The fully charge status is indicated by the FULL LED (green) lit, and the red LED turned off. In order to improve the charge efficiency, during the charge process do not connect to Energy Box your notebook if its
Step 5:
Once Energy Box is fully charged, before proceeding the Lock/Unlock switch must be in Lock position. Then connect the selected output tip (LxxD) to bundled output cable, then insert it into
5