Compaq 8100 manual Bay 8.19 depth, Internal Drive Bays Bay for primary hard disk drive

QuickSpecs

HP Compaq 8100 Elite PC

Standard Features and Configurable Components (availability may vary by country)

3.5"	(1) bay available for Media Card Reader	N/A
	unless used for a secondary hard drive	NOTE: A 3.5”device can be used in
		5.25” bay with an adapter.
5.25"	1 bay (8.19" depth)	3 bays
		Top two bays accept drives up to 8.19” depth
		Bottom bay accepts drives up to 5.7”depth
Internal Drive Bays	1 bay for primary hard disk drive	3 bays for 3.5” hard disk drives
	A secondary HDD can be installed in 3.5”	2.5" SSD can be installed with an
	external bay if not used for an external device	adapter bracket
Hard Drive Controller	Serial ATA with support for SATA 1.5-Gb/s and 3.0-Gb/s hard drives
SATA Interfaces	(4) Serial ATA interfaces	(5) Serial ATA interfaces
	NOTE: Three common SATA ports and	NOTE: Four common SATA ports and
	one that can optionally be used for eSATA	one that can optionally be used for eSATA
Host SATA Controller	Advanced Host Controller Interface (AHCI) Revision 1.2. The specification includes a description
	of the hardware/software interface between system software and the host controller hardware.
Small Form Factor		Convertible Minitower

Storage – Drive Support

		SFF			CMT
	MCR	ODD	HDD	MCR	ODD	HDD
			SSD			SSD
Quantity Supported	1	1	2	1	2	3
Position	1	3	2,1	3	1,2	4,5,6

DA - 13524 Worldwide — Version 5 — February 3, 2010 Page 10