Other Features Description | Compaq dc7800 instruction

Other Features	Description
ACPI-Ready Hardware	Advanced Configuration and Power Management Interface (ACPI).
	Allows the system to wake from a low power mode.
	Controls system power consumption, making it possible to place individual cards and
	peripherals in a low-power or powered-off state without affecting other elements of the
	system.
SMBIOS Ver. 2.5	System Management BIOS, for system management information
Wired for Management	Intel-driven, industry-wide initiative to make Intel architecture-based PCs, servers and mobile
Support	computers more inherently manageable right out of the box and over the network
Dual-State Power Button	Power button acts as both an on/off button and suspend-to-sleep button

Serviceability Features of System

Dual Color Power LED on Front of Computer (Indicates Normal Operations and Fault Conditions)

Diagnostic LED Explanation Table	Number of 1-second red LED blinks followed by 2-second pause, then repeats:
	2-processor thermal protection activated
	3-processor not installed
	4-power supply failure
	5-memory error
	6-video error
	7-PCA failure (ROM detected failure prior to video)
	8-invalid ROM, bootblock recover mode
System/Emergency ROM	Flash ROM	CMOS Battery Holder for easy
		Replacement
Flash Recovery with Video	5 Aux Power LED on System PCA	Processor ZIF Socket for easy
Configuration Record SW		Upgrade
Over-Temp Warning on Screen	Clear Password Jumper	DIMM Connectors for easy Upgrade
(Requires IM Agents)
HP Backup and Recovery	Clear CMOS Button	NIC LEDs (integrated) (Green &
Manager		Amber)

Serviceability Features of Chassis
Dual Color Power and HD	Color coordinated cables and	Tool-less Hood Removal
LED – To Indicate Normal	connectors
Operations and Fault
Conditions
Front power switch	System memory can be upgraded	Tool-less Hard Drive, CD & Diskette
	without removing the system board or	Removal
	any internal components

Green Pull Tabs, and Quick

Release Latches for easy

Identification

NOTE: Thumb screw release mechanism is used with the Ultra-slim Desktop chassis cover.


Additional Features		Description
AMT 3.0 support (Active		Select models offer new Intel vPro Technology utilizing AMT 3.0 for network alerting
Management Technology)		and management of systems regardless of power state, as well as operating system-
		absent environments.
		Supports existing AMT 2.1 features plus:
		Remote Configuration (RCFG) – Uses root certificate hashes for simpler
		deployment (existing PSK method remains supported)
		802.1x – compatibility with Cisco NAC
		WS-Management – Web Services for Management interface

	DA -	12744 Worldwide QuickSpecs — Version 13 — 12.14.2007	Page 21