Reconfiguring the AlphaServer IP Platform

4.3 ISA Bus Expansion Chassis Configuration

The ISA bus expansion chassis provides a flexible capacity for adding voice modules of varying types based on products from Dialogic. See Section 1.4 for a complete list of available ISA bus expansion options.

Once the Dialogic voice modules are physically installed, you need to configure them by running the ECU from the IP Platform console terminal. Use the ECU to register the modules with the system hardware, and to reserve the addresses and interrupt request levels (IRQs) that are to be used by the modules. The ECU attempts to identify and resolve resource conflicts. The ECU may also be used to determine unused I/O ports, shared memory address, and IRQs.

In addition to the Dialogic voice modules, other components within the ISA bus expansion chassis include the:

∙Fan

∙Power supply

∙Alarm sensor module

∙Access I/O transceiver (AT bus expansion kit)

For a complete description of installing and configuring the voice-option modules, refer to the Dialogic documentation shipped with the option.

For a complete description of removing and replacing the fan or power supply, refer to the I- Bus 4820 User Manual that is shipped with your system.

Refer to Section 4.3.1 and Section 4.3.2 for complete descriptions of removing and replacing the alarm sensor module and the AT bus expansion kit.

4.3.1 Removing and Replacing the Alarm Sensor Module

The alarm sensor module is mounted in the drive bay area of the ISA bus expansion chassis. The 2T-IPSEN-AA alarm sensor module kit consists of an alarm sensor module, a cable to connect the alarm sensor module to the rear bulkhead, and a cable to connect the rear bulkhead to the alarm control module in the AlphaServer 1000A.

Perform the following procedure to remove the alarm sensor module:

1.Remove power from the ISA bus expansion chassis by pressing the On/Off switch on the front of the ISA bus expansion chassis.

2.Remove the screws that secure the ISA bus expansion chassis to the front rails and extend the ISA bus expansion chassis on the slides.

3.Remove the screws that secure the top cover and remove the top cover from the ISA bus expansion chassis.

4.Disconnect the 6-pin bulkhead cable, the 4-pin power supply cable, and the 2-pin temperature sensor cable from the alarm sensor module.

5.Remove the four screws that secure the alarm sensor module to the standoffs and remove the alarm sensor module.

To replace the alarm sensor module, reverse steps 1 through 5 of the removal procedure.

AlphaServer Intelligent Peripheral Platform Hardware Owner's Guide 4–3

Page 42 Page 44
Page 43
Image 43
Compaq EK-ASIP2-OG. D01 manual ISA Bus Expansion Chassis Configuration, Removing and Replacing the Alarm Sensor Module
Page 42 Page 44

EK-ASIP2-OG. D01 specifications

The Compaq EK-ASIP2-OG. D01 is a significant product in the landscape of enterprise computing, featuring a range of capabilities that cater directly to the needs of businesses seeking high-performance solutions. This hardware is designed for a range of applications, offering a solid balance between efficiency and power, making it suitable for varying workloads.

One of the key features of the EK-ASIP2-OG. D01 is its robust processing architecture. It is equipped with advanced microprocessor technology that ensures high-speed data processing and multitasking capabilities. This feature is particularly valuable in environments that require the simultaneous execution of multiple applications, thereby enhancing productivity and operational efficiency.

In addition to processing power, the EK-ASIP2-OG. D01 integrates significant memory capacity. This ensures that large applications can run smoothly without performance bottlenecks. The system supports scalable memory configurations, allowing users to optimize their setup according to their specific needs. This flexibility is essential for organizations that anticipate growth or require variable resource allocation.

Networking capabilities are another standout aspect of the EK-ASIP2-OG. D01. It comes with advanced network interfaces that promote seamless connectivity and high-speed data transfer. This is crucial for enterprise environments where data needs to be shared across various departments or locations in real time. The integration of leading networking technologies ensures reliable communication and collaboration, which are vital for modern business operations.

Furthermore, the EK-ASIP2-OG. D01 is designed with advanced security features, addressing the growing concerns around data protection. These features include encryption capabilities and secure access controls, ensuring that sensitive information remains safeguarded against potential threats. This focus on security makes it an ideal choice for businesses that prioritize safeguarding their data.

In terms of energy efficiency, the EK-ASIP2-OG. D01 employs power management technologies that reduce energy consumption without compromising performance. This not only contributes to cost savings for organizations but also aligns with sustainability goals, a factor increasingly important to businesses globally.

In conclusion, the Compaq EK-ASIP2-OG. D01 is a powerful and versatile server solution, equipped with cutting-edge technologies, robust security features, and sustainable energy practices. It is designed to meet the demands of modern enterprises, making it a reliable choice for businesses looking to enhance their computing capabilities and overall operational efficiency.
Top Page Image Contents