Cyclades AlterPath BladeManager user manual Alarm Trigger, Deleting a Device from a Group

Alarm Trigger

>> Deleting a Device from a Group

The proper way to delete a chassis, blade or switch from a group is to edit the group from which they belong. To delete a device from one or more groups, follows the steps below:

1.From the menu panel, select Devices. The system displays the Device List form.

2.Under the Config column of the Console List form, click on the Edit link of the device you wish to remove from a group.

The system displays the Device Detail form for the selected device.

3.From the Device Detail form, click on Groups. The system displays the Device Group form.

4.From the Selected Groups view panel of the Console Group form, select the group or groups from which you wish to remove the current device.

5.Click on the Delete button.

6.Click on the Save button to complete the procedure.

Deleting a Device Group

You cannot delete a device group using the Device Group form. To delete a device group, select Groups from the menu and refer to the Groups section of this chapter.

Alarm Trigger

Note: Alarm triggers work only with Blades and Switches.

An alarm trigger is a text string that you can create to generate any one or combination of the following:

•Email notification for users or administrators

•Alarm

AlterPath BladeManager Manual 4-39