Cyclades AlterPath BladeManager user manual Resetting Configuration to Factory Settings, Password

First Time Configuration Wizard

•Enter Date (format MM/DD/YYYY)

•Enter Primary Ethernet IP Address (Static/None).

•Enter Secondary Ethernet IP Address (Static/None)

•Configure Ethernet Subinterfaces (Yes/No/List)

•Configure Ethernet VLANs (Yes/No/List)

•Enter Ethernet default gateway

•Enter System’s Hostname (30 characters max)

•Enter System’s Domain name (60 characters max)

•Enter Primary nameserver’s IP address

•Enter the NTP Server

•Enter email (SMTP) server

•Enter Authentication Method (local/radius/tacacs+/ldap/kerberos/nis/ active_directory)

Note: Depending on the Authentication Method that you select, the system will prompt you for additional information. See “Setting the Authentication Method” on page 4-8 for more information.

>> Resetting Configuration to Factory Settings

If you make a mistake during the First Time Configuration (or if you need to make a change in the configuration), you can reset the configuration to its factory default settings and start over. To reset the configuration, follow these steps:

1.Log in to the management console as root.

2.Type in: defconf and press <Enter>.

3.Type in: reboot and press <Enter>. Example:

BladeManager login: root

Password:

.

.

[root@BladeManager root]# defconf

WARNING: this will erase all of your current configuration and restore the system's factory default configuration. This action is irreversible!

AlterPath BladeManager Manual 4-5