Cyclades AlterPath BladeManager Selecting Users to Access the Console, Adding a Switch Console

Blades / Switches

Table 4-10:Consoles Detail Form - Fieldnames and Elements

Fieldname	Definition
Status	Drop down list. Enable, Disable, OnDemand.
Log Rotation	Frequency of the automatic log rotation
	process (Never, Daily, Weekly, Monthly).
Back	Button to revert to the last page or form.
Save	Button to save the configuration.
Logrotate Now	This field appears only if you selected Edit
	instead of the New button from the Console
	List form.
	Use this button to close and compress the
	console buffer log file, and to open a new file
	to receive new log entries. This operation
	overrides the Log Rotation automatic setting.

4.Complete the Console Detail form, as necessary.

5.Click on Save to complete the procedure.

Adding a Switch Console

Adding a switch console follows the same procedure, except you have to select Switch when the system prompts for the console type. Be sure that you have set the switch to Enable (go to Chassis > Switch) in the switch device form otherwise you will receive an error message.

>> Selecting Users to Access the Console

Use the Console Access form to assign and authorized one or more users to access the current blade console.

1.From the Console Detail form (Consoles: Console List > Console Detail), click on the Access button.

AlterPath BladeManager Manual 4-49