Cyclades AlterPath BladeManager user manual Power-control button, Reset button, Rear LEDs Function

BladeManager Controls, LEDs, and Power
	Front LEDs/Buttons	Function
	Power-control button	Press this button to switch the server ON
		and OFF manually.
	Reset button	Press this button to reset the server and
		run the power on self-test (POST). You
		might have to use a pen or the end of a
		straightened paper clip to press the button.

Rear View

The diagram below shows the LEDs on the rear of the BladeManager.

Rear LEDs	Function
Ethernet 1 transmit/receive	This LED is on the Ethernet connector.
activity LED	When lit, it indicates that there is activity
	between the BladeManager and the
	network.
Ethernet 1 speed 1 Gbps LED	This LED is on the Ethernet connector.
	When lit, it indicates that the Ethernet
	network speed is 1 Gbps. When off, it
	indicates that the Ethernet network speed
	is 10 Mbps or 1000 Mbps.

AlterPath BladeManager Manual 2-25