Cyclades AlterPath BladeManager user manual Connecting to the Web Interface, Encrypted version

First Time Configuration Wizard

Any deviation from this standard may cause the web browser to disable APBM cookies and prevent the user from logging into the E2000 web application.

>> Connecting to the Web Interface

Now that the installation is complete, you can begin the configuration using the web interface.

1. Type in the following URL from your web browser: http://nnn.nnn.nnn.nnn

(Non-encrypted version)

- OR - https://nnn.nnn.nnn.nnn

(Encrypted version)

Where: nnn.nnn.nnn.nnn is the IP address of either the first or second Ethernet interface that you defined during the First Time Configuration.

2.When the Login screen appears, enter admin as the username and the password (as specified in the First Time Configuration wizard).

The admin user is by default the manager of the BladeManager web interface and runs the application in admin mode. This designation cannot be revoked.

Disabling HTTP to Use Only HTTPS

The BladeManager is configured to allow both HTTP and HTTPS access. You can, however disable HTTP access by commenting out its configuration in the BladeManager unit by using the command line.

Note: To configure the encrypted version, see “Disabling HTTP to Use Only HTTPS” on page 5-16

AlterPath BladeManager Manual 4-9