Compaq Mega-Post manual Error Code 9A, Error Code 9C, Error Code 9E

Appendix A

Compaq	(90)Start of CMOS test .
Chips & Tech (90)Set-up RAM.
Phoenix	(90)Initialize hard-disk controller.(Beep)=3-2-1-1
	Error Code - 91
AMI	(91)Floppy setup complete. Hard disk setup to be done next.
Compaq	(91)CMOS seems to be OK.
Chips & Tech (91)CPU speed.
Phoenix	(91)Initialize local-bus hard-disk controller.(Beep)=3-2-1-2
AMI	Error Code - 92
	(92)Hard disk setup complete. About to go for BIOS ROM data area check. (92)Error
Compaq	on CMOS read/write test.
Chips & Tech (92)Configuration check.
Phoenix	(92)Jump to User Patch 2.(Beep)= 3-2-1-3
AMI	Error Code - 93
	(93)BIOS ROM data area check halfway. BIOS ROM data area check to be
Compaq	completed.
	(93)Start of DMA controller test.
Phoenix	(93)Build MPTABLE for multi processor boards.
ACER	Error Code - 94
	(94)#5 shutdown.
AMI	(94)Hard disk setup complete. Going to set base and extended memory size. BIOS
Compaq	ROM data area check over.
	(94)Page registers seem OK.
Chips & Tech (94)POD Bootstrap.
Phoenix	(94)Disable A20 address line.(Beep)=3-2-2-1
AMI	Error Code - 95
	(95)Memory size adjusted due to mouse support, hard disk type-47.Going to verify
	from display memory.
Compaq	(95)DMA controller OK.
Chips & Tech (95)Reset ICS.
Phoenix	(95)Install CD ROM for boot.
	Error Code - 96
AMI	(96)Memory size adjusted due to mouse support, hard disk type-47.Going to do any
	Init before C800 optical ROM control. Returned after verifying from display
Compaq	memory.
	(96)8237 DMA Initialization complete.
Chips & Tech (96)BIOS PEAK.
Phoenix	(96)Clear huge ES segment register.(Beep)=3-2-2-3.
	Error Code - 97
AMI	(97)Any Init before C800 optional ROM control is over. Optional ROM check &

	control will be done next.
Chips & Tech (97)VGA power.
Phoenix	(97)Fix-up Multi Processor table.
	Error Code - 98
ACER	(98)#A shutdown.
AMI	(98)Optional ROM control is done. About to give control to do any required

	processing after optional ROM returns control.
Chips & Tech (98)Adapters POS.
Phoenix	(98)Search for option ROMs. One long, two short beeps on checksum
	failure.(Beep)=3-2-3-1.
	Error Code - 99
AMI	(99)Any initialization required after optional ROM test over. Going to setup timer
	data area and printer base address.
Phoenix	(99)Check for SMART Drive(optional).
	Error Code - 9A
AMI	(9A)Return after setting timer and printer base address. Going to set the RS-232
Phoenix	base address.
	(9A)Shadow option ROMS.(Beep)=3-2-3-3.
	Error Code - 9B
AMI	(9B)Returned after RS-232 base address. Going to de any initialization before
	Co-Processor test.
ACER	Error Code - 9C
	(9C)#B shutdown.
AMI	(9C)Required initialization before co-Processor is over. Going to initialize the
Phoenix	CoProcessor next.
	(9C)Set up Power Management.(Beep)=3-2-4-1.
AMI	Error Code - 9D
	(9D)CoProcessor initialized. Going to do any initialization after CoProcessor test.
	Error Code - 9E
	20