Adjusting the Projected Image, Adjusting the Projector Height

Adjusting the Projected Image

There are three ways to adjust the projected image:

■Adjusting the projector height

■Adjusting the image size

■Adjusting the projector focus

The projector has a built-in elevator foot that can raise the projector approximately 1 inch (2.54 cm).

To adjust the height:

1.Raise the projector to the desired display angle, then press the elevator button 1 to release the elevator foot 2.

2.To lower the display angle, press the elevator button again and press down on the projector to lower it.

ÄCAUTION: Failure to press the elevator button before adjusting the elevator foot can result in damage to the elevator mechanism.

3.Turn the screw on the rear foot 3 to raise and lower the back side of the projector for balance.

2–8	Compaq iPAQ Microportable Projector MP1200 User’s Guide