Compaq MP1200 manual Enter/Accept

Getting Started

Identifying the Projector Buttons (Continued)

Item	Symbol	Control	Function
3		Power/Standby	Powers the projector lamp on and off.
		button	The Standby LED changes color
			modes to indicate the following
			operating modes:
			1.	Flashing green indicates the
				projector is going into standby
				mode and cannot be restarted until
				the LED glows amber steadily.
			2.	The LED button rapidly flashing
				green indicates the lamp has
				automatically shut down due to an
				over-temperature event.
			3.	A steady amber LED indicates the
				projector is ready to power-up.
			4.	A steady green LED indicates the
				projector is on and operating
				properly.
4		Menu button	Press this button once to start the
			on-screen display menu. Press it
			again to save any changes and exit
			the menu.
5		Enter/Accept	When the on-screen display menu is in
		button	use, performs the following functions:
			1.	Displays any sub-menus below the
				main menu.
			2.	If pressed after selecting “yes” or
				“no” to a question, the request will
				be processed and the menu will go
				one level higher.
			3.	If pressed after changing an
				adjustment scale, the new
				information will be saved and the
				menu will go one level higher.

1–6 Compaq iPAQ Microportable Projector MP1200 User’s Guide