Compaq SCSI warranty Technical Specifications

QuickSpecs

Compaq ProLiant ML330 Generation 2 (G2)

Technical Specifications

System Unit	Dimensions (HxWxD)	16.5 x 7.5 x 20.25 in/420 x 191 x 515 mm
	(with feet)
	Weight (approximate)	34 lb/15.42 kg
	Input Requirements	Range Line Voltage		100 to 120 VAC/180 to 264 VAC
	(per power supply)	Normal Line Voltage		115 to 230 VAC
	Line Frequency	50 to 60 Hz
	Rated Input Current	< 6A RMS at 90VAC with
			maximum load
	BTU Rating	1,560 BTU
	SCSI Connectors	Two internal HD68 connectors
	(SCSI Models only)	Note: Support for either two internal, two external, or a mix of internal/external is
			available. This is achieved using an internal to external SCSI cable option
			kit (PN 159547-B22) and SCSI knockout.
	Power Supply Output Power	Rated Steady-State Power		300W
		Maximum Peak Power		400W
	Temperature Range	Operating		50° to 93°F/10° to 35°C
		Shipping		–40° to 150°F/–40° to 66°C
	Relative Humidity	Operating		20% to 80%
	(non-condensing)	Non-operating		5% to 90%
	Acoustic Noise	Idle
			(Fixed Disk Drives Spinning)
			L WAd (BELS)	5.3
			L pAm (dBA)	45
		Operating
		(Random Seeks to Fixed Disks)
			L WAd (BELS)	5.3
			L pAm (dBA)	45
1.44-MB Diskette Drive	Diskette Size	3.5 in
	LED Indicators (front panel)	Green
	Read/Write Capacity per	1.44 MB/720 KB
	Diskette (high/low density)
	Drive Supported	One
	Drive Height	One-third
	Drive Rotation	300 rpm
	Transfer Rate (high/low)	500/250 Kb/s
	Bytes/Sector	512
	Sectors/Track (high/low)	18/9
	Tracks/Side (high/low)	80/80
	Access Times	Track-to-Track (high/low)		3/6 ms
		Average (high/low)		169/94 ms
		Settling Time		15 ms
		Latency Average		100 ms
	Cylinders (high/low)	80/80
	Read/Write Heads	Two

DA-10961 World Wide — Version 18 — June 27, 2002 28